Ford Muscle Cars Tech Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
Hi. When installing headers onto aluminum heads, should I use antiseize on the header bolts? I know I need to for the spark plugs, but I was wondering if the same held true for header bolts. Thank you for your time.
 

·
Registered
Joined
·
1,311 Posts
YES.
Personaly id go so far as to have the holes professionaly heili-coiled and then still use a small ammount of anti-seize. Definiatly if you have stainless bolts.
Good luck
 

·
Registered
Joined
·
5,551 Posts
What he said. Edelbrocks are heli-coiled in all holes except the plug holes from the factory!
 

·
Registered
Joined
·
275 Posts
On 2006-04-02 16:47, tonys10sec306 wrote:
intake bolts too?
I did on mine. Heck, I use anti seize for exhaust bolts on iron heads.
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #9 ·
Ok, thanks for the replies. I'll be sure to do that. What about intake manifold bolts? should I do those too? Thank you for your time.
 
1 - 9 of 9 Posts
Top