Ford Muscle Cars Tech Forum banner

Headers and aluminum heads

1454 Views 8 Replies 8 Participants Last post by  parchisi
Hi. When installing headers onto aluminum heads, should I use antiseize on the header bolts? I know I need to for the spark plugs, but I was wondering if the same held true for header bolts. Thank you for your time.
1 - 1 of 9 Posts
Personaly id go so far as to have the holes professionaly heili-coiled and then still use a small ammount of anti-seize. Definiatly if you have stainless bolts.
Good luck
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.