Ford Muscle Cars Tech Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1 (Edited)
Has anyone used the Hooker 6901hkr painted headers on edelbrock heads for 289-302 in a early mustang? Can anyone verify if the inexpensive 6901 headers have a square port opening? I'm also interested in hearing about other headers that work with the Edelbrock heads.
 

·
Premium Member
Joined
·
1,330 Posts
I have two sets of the Hooker 6901-1HKR ceramic coated and they have square ports that match the heads.
 

·
Registered
Joined
·
1,604 Posts
Same here, Hooker 6901s and Edelbrock 60259 heads. The headers intrude a little at the sides of the exhaust ports but you don't get much flow there anyway. No signs of reversion.
 

·
Registered
Joined
·
1,064 Posts
Hedman long tube # 88-300;s spec;d for a 70's Mav. running a 289-302-351. work with the Edelbrock heads too, i;m running them in a 62 Fairlane, one of the many headers that will work once you've done the shock tower notch kit from RRS.
 
1 - 5 of 5 Posts
Top