Joined
·
15 Posts
Help!!!
cant find headers that will work for my 77 f150 4x4 and np435 4-speed i have yanked the stock 400 and will be dropping in a 89 mustang roller 306 w/ frpp b-cam ,1.7 roller
rockers,ported e7 heads balanced blueprinted bottom end
edelbrock performer 289 and edlebrock 600 cfm preformer
carb (hope this will be enough to pull the beast around)
i tried to use (out of ignorance) the mac equal length
shortys and of course it works great on the passenger side
but interferes w/ the clutch release linkage on the driverside
any one here ran into this... i have been told that 72 torino headers will work but dont know how much truth there is to that.....any ideas would be appriciated !!!!!! much
cant find headers that will work for my 77 f150 4x4 and np435 4-speed i have yanked the stock 400 and will be dropping in a 89 mustang roller 306 w/ frpp b-cam ,1.7 roller
rockers,ported e7 heads balanced blueprinted bottom end
edelbrock performer 289 and edlebrock 600 cfm preformer
carb (hope this will be enough to pull the beast around)
i tried to use (out of ignorance) the mac equal length
shortys and of course it works great on the passenger side
but interferes w/ the clutch release linkage on the driverside
any one here ran into this... i have been told that 72 torino headers will work but dont know how much truth there is to that.....any ideas would be appriciated !!!!!! much
