Ford Muscle Cars Tech Forum banner
1 - 1 of 1 Posts

· Premium Member
Joined
·
2,216 Posts
Once you get a motor to the stumble point you will generally have to back out of it for it to clean up and run.

Make sure you accelerator pump nozzles are both shooting strong jets of gas. It is common for these to get clogged up with trash.

If thats not it then it is most likely in the step up mode on your primary jets as in not enough jet or too much needle or the needles pull up too late and it leans out first.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top