Ford Muscle Cars Tech Forum banner

1 - 1 of 1 Posts

202 Posts
Discussion Starter #1
Hello all! i was hoping there are some people here who have had the same issue. Ive been driving my 63 after letting it set in the garage for the last 5 years untouched, so theirs quite a few things I've been working on. The wiper switch in the car wasn't working, come to find out the guts were gone. so as many of you most likely know their hard to come by. So i got an 8$ universal wiper switch Universal Windshield Wiper Switch for Single Motor - Speedway Motors, America's Oldest Speed Shop

I temporarily wired it up and it works, my wipers turn on and park. But my plug and old switch have four prongs. I'm pretty sure its a single speed motor and i just don't want to burn up the motor or switch by wiring it wrong. Basically what im asking if i hook up three of the four wires to my new switch will it be ok? Its a two speed switch so H wont be used, so what wires go where? Any help will be much appreciated

IMG_20140611_145704 by fast_67ford, on Flickr

IMG_20140611_145807 by fast_67ford, on Flickr

IMG_20140611_150200 by fast_67ford, on Flickr

IMG_20140611_151050 by fast_67ford, on Flickr

IMG_20140611_151117 by fast_67ford, on Flickr

IMG_20140611_150810 by fast_67ford, on Flickr
1 - 1 of 1 Posts