I found this on the net. they claim 600hp
and they want USD $3800
302 Race BOSS engine
CARB:
2x Holley 660 cfm nr 4224
MANIFOLD:
Weiand Tunnel Ram
HEADS:
302 BOSS 1970 modified for Holman-Moody exhaust.
Titanium inlet valves and retainers. K-motion 3x valvesprings Harlan Sharp 1.73:1 rocker roller arms
Jomar stud girdles
Manley 7/16" vipparmsbultar
Manley Guideplates
Milodon ½" pinnbultar
Moroso crome valvecovers
BLOCK:
302 standard. polished inside
Ramlageröverfallen är förstärkta med Milodon stålplattor och pinnbultar
CRaNK:
302 BOSS steel
Balanced with inlay of tungmetall. Mitrithardend
Grounded 0.10".
Super Damper Harmonic balancer
RODS:
Superrod aluminium. Length 5.40"
PISTONS:
BRC forged, gasported
Total Seal kolvringar
CAMSHAFT:
Crane roller and lifters
Cloyes True Roller timing gear drive
PUSHRODS:
Smith Brothers
OILPUMP:
Melling highvolume
Milodon oilpickup
Pan modified with a Morso kit
IGNITION:
Accel electronic dist model 35201T
Accel BEI ignition controll box and coil
MSD Spark plug wires
EXHAUST:
Holman-Moody headerplates
Hooker Headers with 2 1/8" primary and 4" collector
and they want USD $3800
302 Race BOSS engine
CARB:
2x Holley 660 cfm nr 4224
MANIFOLD:
Weiand Tunnel Ram
HEADS:
302 BOSS 1970 modified for Holman-Moody exhaust.
Titanium inlet valves and retainers. K-motion 3x valvesprings Harlan Sharp 1.73:1 rocker roller arms
Jomar stud girdles
Manley 7/16" vipparmsbultar
Manley Guideplates
Milodon ½" pinnbultar
Moroso crome valvecovers
BLOCK:
302 standard. polished inside
Ramlageröverfallen är förstärkta med Milodon stålplattor och pinnbultar
CRaNK:
302 BOSS steel
Balanced with inlay of tungmetall. Mitrithardend
Grounded 0.10".
Super Damper Harmonic balancer
RODS:
Superrod aluminium. Length 5.40"
PISTONS:
BRC forged, gasported
Total Seal kolvringar
CAMSHAFT:
Crane roller and lifters
Cloyes True Roller timing gear drive
PUSHRODS:
Smith Brothers
OILPUMP:
Melling highvolume
Milodon oilpickup
Pan modified with a Morso kit
IGNITION:
Accel electronic dist model 35201T
Accel BEI ignition controll box and coil
MSD Spark plug wires
EXHAUST:
Holman-Moody headerplates
Hooker Headers with 2 1/8" primary and 4" collector
