[strokerman]

thanks mach1morgan for that. car is fast at 2500 to4500 i know cam is small thinking of bigger cam but lunati says its a good cam for my car which is mainly street driven i could go bigger cam maybe victor jr manifold but i'm putting in a c-4 trany instead of fmx to see how it runs maybe 10'' converter with 3000 stall hope to pick up a few more ponies by eletric fan and other things battery in trunk fiberglass hood little stuff see what happens . plus bigger brakes cant stop this dam thing thanks again

 

[Mach1Morgan]

If you end up staying with the same cam a converter that stalls at about 2500 or slightly more will be all you'ld need. At 3000 RPM the engine only made a few ft/lbs more than it did at 2500 so all the extra stall speed would do is create heat and lower your top end speed. If you are going to a bigger cam though a 3000 stall might be beneficial.