Ford Muscle Cars Tech Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Tluks,
The first thing you’ll want to do, verify the gas pedal is the correct distance from the floor. When I first got my 63 Galaxie tri-power, I had to push the gas pedal almost thru the floor to get the other carbs engaged. I believe the species 3&1/4” from the floor (don’t have the manual in front of me) mine was 2”. It is adjusted by the linkage on the drivers side of the carbs. The secondary Rod on the passenger side needs to be adjusted as well. I believe it is 7”.
On mine the 2 slide linkages that go to the front & rear carb are set bout half way. I like it that way, some folks might like it different. Good luck.
 
1 - 2 of 2 Posts
Top