Is it worth IT !!!!!

1378 Views 9 Replies 8 Participants Last post by 71hotrodpinto, May 13, 2006

KINTARO

Discussion Starter · Feb 25, 2006

I HAVE A 302 CI AVAILABLE TO ME FOR LITTLE MONEY.HERE IS THE LIST OF STUFF.it has AFR 185 with undercut swirl polished hollow valves beehive springs titanium retainers.It has shaft rockers 1.6 it has XE282hr cam Tfs box r intake.compression ratio is 9.0-1 it has cometic head gaskets.75mm t-body 36#injectors. is it good combo.how much power will it make on an engine dyno.

See less See more

Save

1 - 2 of 10 Posts

KINTARO

Discussion Starter · #5 · Mar 2, 2006

I JUST FOUND OUT IT WAS BUILT ON A DYNO IT HAS ABOUT 100 DYNO PULLS ON IT IT WAS USED TO CHECK CAMSHAFTS.THE MOST POWER IT MADE WAS 450HP WITH A SOLID ROLLER CAM.WILL THIS EXISTING COMBO WITH THE XE282 WORK WITH A TURBO HOW MUCH POWER @10 PSI.

<font size=-1>[ This Message was edited by: KINTARO on 3/2/06 12:03pm ]</font>

Save

1 - 2 of 10 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month