Ford Muscle Cars Tech Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
I am in need of a kick down rod/lever for a 69 Mercury cyclone 428CJ R code. this is different than a Mustang, cougar but should be the same as a montego and torino. dont care what the condition is, i can have a stainless one made if its that bad but i need one to use as a template.
thanks for your help.
[email protected] or 440-387-9883.
 

·
Registered
Joined
·
10,342 Posts
Welcome! If you can't get your hands on an original to duplicate, simply bend one up from welding rod and fab that template.

David
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
ok just spoke with a friend who says that it is not a rod but linkage that runs from the firewall through the bell housing on the tranny and then connects to the kickdown link on the tranny.

but i dont have this either so if you do please let me know.

i also need the accelerator pedel linkage that has the flap that touches the firewall and the back of the block. this flap is part of the kickdown linkage assembly. so im told......

thanks in advance for you help.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top