Ford Muscle Cars Tech Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
189 Posts
Discussion Starter · #1 ·
I know this has been discussed in length. Has anybody here lowered a galaxie when using late 70's spindles with discs. How did your alignment come out. I was running these spindles but my front end was raised to emulate an original lightweight, I had no problems but ran zero shims . now that the car is lowered, tires are out on the top with zero shims installed. Am I missing something? Am I going to have to run my stock spindles to get these tires right. I think greg cook ran adapters on stock spindles fabbed up by booze bros racing, would be alot lighter. Any help would be greatly appreciated.
 

·
Registered
Joined
·
20 Posts
I had the same problem but at stock height. I tried two different T-Bird spindles and couldn't get the camber right. Perhaps there are different T-Bird spindles? I went back to my stock spindles and a MP Power Brake kit.
 
1 - 2 of 2 Posts
Top