Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
I have a 1968 Galaxie 500 with a 390 that has a 2bbl intake and carb. I'm about to buy a 4bbl intake for it to help it breathe better. I have been looking into a Demon carb that is equipped with electric choke. My 2bbl that is on there (a Tomco remanufactured from my employer Oreilly's) is equipped with manual choke. What all do I need to do to accommodate that electric choke carb?
 

·
Registered
Joined
·
160 Posts
recruit, the electric choke is simply 12v key on power, basically use a wire tester to find the wire with voltage only when the key is on, hook that up to the one wire coming from the electric choke, most electric chokes ground to the body of the carbuerator. Very easy deal. Good luck
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #3 ·
Much appreciated sir. I had heard a few different things from a few different people regarding this question. But I just now ordered that Demon carb with the confidence it will work for me.
 
1 - 3 of 3 Posts
Top