Ford Muscle Cars Tech Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
223 Posts
Discussion Starter · #1 ·
I've just installed Moroso rear springs in my 1990 Mustang. The car is still missing a few things weight-wise, like the battery and interior panels. The fender lip is 4.75" off the tire, kinda way up there for my taste. Even if i push the back of the car down the body doesnt even get close to a decent looking reveal on the tire. Anyone have good results with ride height on these springs? Thanks.
 

·
Registered
Joined
·
3,692 Posts
IF you want them to sit lower then simply cut them with a chop saw, 1/2 coil at a time. Heating them will change the springs temper and its spring rate.


BTW don't cut too much until you've got all the weight back in the car, including driver weight. Don't forget that they will settle a bit with time.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top