Ford Muscle Cars Tech Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #3 · (Edited)
Me to John !
I have Edelbrock E-Street Heads. I bought them when they first came out & now they state : CAN NOT BE USED WITH A ROLLER CAM" The springs are to week & will break ! All the spring seats would have to be machined to put stiffer & larger springs on.

Just not worth it....

The block should be a roller- if that matters on the lifters ?
http://www.edelbrock.com/automotive_new/mc/cylheads/ford/sb_estreet.shtml
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top