Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
182 Posts
Discussion Starter #1
I've got a 66 Mustang with P/S. After bebuilding the valve body the steering is rediculously easy. I can turn the wheel stop to stop at an idle with one finger. It also seems to turn slightly easier to the right. I have adjusted the ball valve per Fords specs but no change. Anybody have any suggestions?
 

·
Registered
Joined
·
16 Posts
look closely at the valve spool.within one of the grooves there are three lands and two large groves you'll see a narrow grove.this narrow grove must face the small end of the valve housing,
 

·
Registered
Joined
·
284 Posts
i just put in my new control valve and it only turn with assist in one direction counter clockwise, is it defective?
 
1 - 3 of 3 Posts
Top