Ford Muscle Cars Tech Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hellow guys I am new to the forum and was wondering what power expectations I should have for my 408w project I'm building I have a 69 mustang conv. and put together a bujet short block cast crank forged 6.2 rods and hyper dished pistons giving me 9.5 conpresion with 64cc heads from Rhs 200cc runners typhoon intake xtreme energy comp cam dur.284/296 lift .541/.544 flat hydralic flat tappet not sure on cam just yet but must be flat tappet because of bujet don't want to go to radical because I drive the car to car shows and the beach don't want to worry about over heating or taking out of the hole at 3500rpm almost forgot also has PA's c4 transmission
 
1 - 1 of 1 Posts
Top