Ford Muscle Cars Tech Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
559 Posts
Tommi, thanks for the posting, however I must be missing something. No help that I can find for a Galaxie and only the Lares steering boxes have the interchange listed and that would be for some early Ford trucks. Help me if I missed something.
406

That was weird, first time I clicked on Tommi's link it brought up steering boxes for Ford Trucks. Second time it brought up boxes for 75 Ford cars. When I posted I used 62 Galaxie and brought up the same number and the link I posted worked a little while for the 62 application then magically changed to 75 Gran Torino....


<font size=-1>[ This Message was edited by: Galaxie_406 on 3/3/06 10:55pm ]</font>
 

·
Registered
Joined
·
559 Posts
Tommi, I now see how you came up with the information. I belive the info is incorrect. Would be a blessing if it were correct. Information is olny as good as the person doing the input and at $6.25 what do we expect.
406

http://www.partsamerica.com/ProductDetail.aspx?mfrcode=LRS&mfrpartnumber=840&parttype=255&ptset=A

Wouldn't this be a blessing if the #840 box worked in our cars! I think I may just order on to compare! If we could use this type then I could reinstall my PS pump and have a decent steering box.



<font size=-1>[ This Message was edited by: Galaxie_406 on 3/3/06 10:58pm ]</font>
 

·
Registered
Joined
·
1,164 Posts
Tommi: I have heard that there is a Saganaw steering box that will fit our cars. I googled Lares Corp and got their phone number. I will phone them on Montag and ask. They sell a lot of Saganaw boxes that were used on GM cars.
 

·
Registered
Joined
·
147 Posts
Discussion Starter · #6 ·
Great! Thanks Rayell!!!!

Yes,it would be nice to have a modern box,i hope it will fit.

Tommi
 

·
Registered
Joined
·
14 Posts
I have this box on my 63 it's awesome! Give Frank a call their products are top notch!!!

On 2006-03-08 04:31, jakengle wrote:
I don't know anything about this company, but there was an article and custom rodder mag a while back about this conversion. Puts a saginaw 605 box in the pre-65 galaxies. I've never heard of another simple, bolt in ps swap for early gals.

http://www.ndgearheadscruiserproducts.com/id21.htm
 
1 - 10 of 10 Posts
Top