Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
Why do some companies offer the headers to be bent the same way on both sides (drivers and passengers), but other companies offer them bent differently. My tri y aren't bent the same way and the passengers side still rubs. I'm still experiencing my problem from this thread: http://www.mustangsandmore.com/ubb/Forum12/HTML/012021.html

Here is an example of both headers being identical: http://cgi.ebay.com/ebaymotors/Mustang-65-70-260-289-302-Tri-Y-Headers-w-Ceramic-Coat_W0QQcmdZViewItemQQcategoryZ33631QQihZ019QQitemZ8026999368QQrdZ1QQsspagenameZWD1V#ebayphotohost ing

And an example of them being different (where I got mine from) http://images.channeladvisor.com/Sell/SSProfiles/60000230/Images/3/exhd10.jpg

I'm stil trying to fix the problem from my previous thread. Some guys are saying I should change over to 66 mounts and that might give me enough clearance and other guys are saying the headers are crap and I should just get new ones. Please help me out guys. Thanks!
 

·
Registered
Joined
·
148 Posts
They probably made that picture in photoshop or something and only used the left side tri-y header in them (one of them mirrored), without realising left and right side are different. I've seen that exact same picture in several catalogs, on ebay etc for years.
 

·
Registered
Joined
·
331 Posts
You have parts like, starter, steering box, clutch linkage, etc that are different side to side.
 
1 - 3 of 3 Posts
Top