Ford Muscle Cars Tech Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
If i was to aquire a pair of rhs 215cc heads for my 351 windsor. would i be forced to notch the pistons for valve clearance?
 

·
Registered
Joined
·
19 Posts
There nice heads though!

Im using the pro top lines before they went out of bussiness and were sold off to comp cams RHS divison.. which are the same heads that RHS now offers
 

·
Premium Member
Joined
·
2,806 Posts
Yes they will need to be notched but it is easy and you can rent the piston notching tool from Isky to do it. The 215s are nice heads
 

·
Registered
Joined
·
3,776 Posts
Pro Topline / Livernois CNC "197" 64cc Ford Small Block Heads


Full CNC Program - Ports and Chambers
Fully Assembled
197 Runner w/ 64cc Chamber
High Flow / High Velocity Port Design for Substantial Horsepower and Torque Gains
303cfm Intake @ .550 Lift
227cfm Exhaust @ .550 Lift
2.020 Intake Valve
1.600 Exhaust Valve

1199.99/pr







_________________


<font size=-1>[ This Message was edited by: tonys10sec306 on 6/25/06 5:06am ]</font>
 
1 - 8 of 8 Posts
Top