Ford Muscle Cars Tech Forum banner

rocker arm help please

1776 Views 14 Replies 10 Participants Last post by  scvpiper
hi all
I have a 70 302. I just installed a comp 268 cam and was trying to adjust the rocker arms. The problem is that the nuts bottom out before they are adjusted. The heads have the stock press in studs and not enought thread. Im using the stock rockers and pushrods. Where do I go from here? Different pushrods rockers or what?
1 - 1 of 15 Posts
I'm thinking that the stock length pushrods may be wrong for the cam.
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.