Ford Muscle Cars Tech Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter · #1 ·
this is my first time installing studs into alum. heads. what type of lubricant do i need to put on the threads. i've been told loctite, anti-seize, or indian head shellac, and yes a few of the studs go into the intake runner. also i've been told to smear some blue permatex beneath the guide plates. what do you guys suggest.
 

·
Registered
Joined
·
1,311 Posts
1 - 3 of 3 Posts
Top