Rotunda Engine Vacuum Gauge Cluster
Join the discussion
Recommended Reading
-
Engine conversion 289 to 351w
Mustang Pages (1965-1973)In converting a 289 to a 351w in a 65 Mustang Fastback can I use the original 3 row radiator? Also, the Hedman shorty headers installed on the 351w are rubbing on the shock towers on the passenger side. How can I fix this?- 1
- 71
-
Tilt steering column replacement
Mustang Pages (1965-1973)I have a 1970 mustang, the steering column was bad so I replaced it with one from flaming river there are a few wires left over and when I apply the brakes the brake light switch heats up , the signals work. Has anyone else done this replacement before if so what color wires did you hook...- 0
- 63
-
-
Just got a 347 Short block to replace my 289 in my 66
Mustang Pages (1965-1973)Like the title says, just decided to upgrade from a 289 to a 347 short block that I got from TRE Performance. What kind of basic power upgrades am I looking at, in displacement alone? I have an Edelbrock Performer intake, a 520 lift cam, and some ported/beefed up 289 heads i'm going to slap on...- 5
- 182
-
Valve adjustment 302 positive stop studs
Mustang Pages (1965-1973)Hello guys, Does anyone really know that the valves or the hydraulic lifters will not adjusted if there are positive-stop rocker arm studs installed? Only tightened/torqued to the shoulder of the studs and go... Its a 302 with iron cast heads... Thanks Martin from germany. Please excuse my...- 3
- 126
Join now to ask and comment!