Ford Muscle Cars Tech Forum banner

Should I be worried??

1000 Views 10 Replies 7 Participants Last post by  frdnut
A friend of mine is almost done with his 302 build which includes 30 over 302 with pop-ups (unknown comp ratio), comp cams magnum solid cam advertised duration 306\306, lift .592\592, lobe sep 110, victor jr intake & holley 750 double pumper on extensively ported 302b iron heads unknown valve sizes but I know they are oversized, c4 with 3500 stall and 4.10 rear gears on m.t et slcks 26x10.5 His car (strip only) is slightly heavier than my capri so I reckon about 2950lbs. My set-up is similar just a milder cam, 40 over with pop-ups, worked iron heads, vic jr & 750 holley, all msd, c4 & rear end & tyres are the same, my capri (strip only) weighs in at 2600lbs.....It,s no biggy to me if he,s set-up is faster (ha!ha!) but I just wanna be prepped coz I know he's also good at the lights.....Cheerz Rob.
1 - 4 of 11 Posts
Sounds comforting Tony....I was just thinking that he might have an edge on me with his wilder cam, I thought his cam profile would be too heavy for the 1/4mile but nobody seems to be commenting on that so I guess it will work for him......can't wait to up-grade to 408ci.
His duration @ .050 is 260/260....Thanx again.
I think it is the standard early iron head, not sure of the exact casting number.
1 - 4 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.