Ford Muscle Cars Tech Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
i need some help. last night we pulled the engine out of my brothers 67 p.u. (it developed a noisy rod) he plans to rebuild it... but thats the problem. no one seems to make parts for 352s. i looked in a summit magazine, and the only intake i could find was $300, i cant even find a rebuild kit for it. does anyone know where we can find a compleet rebuild kit for a 352? also an intake? thanks for the help
 

·
Registered
Joined
·
314 Posts
Speedomotive makes a budget (cast piston)rebuild kit. $404 Their site: http://www.speedomotive.com/newpage31.htm

If the rods or any other internals are damaged you might consider replacing the engine with a 390. You can get a rebuilt long block for not much more than you'll spend on the kit/machine work on the 352. Prob less by the time you consider rebuilding the ehads from the 352. You can get the long block and all the external items like manifolds, distributor, etc will interchange. A 390 would be a direct bolt in and make much more power.

On intakes you have a couple of choices. The Edelbrock Performer ($219) or the Performer RPM ($282)

Later,

David Cole

<font size=-1>[ This Message was edited by: Dave C on 1/10/02 12:44am ]</font>
 

·
Registered
Joined
·
196 Posts
Dont know bout an intake, but try http://www.kanter.com for a rebuild kit.
Steve.

_________________
63 1/2 Galaxie 500 - Black with C code 289, 2 speed trans


<font size=-1>[ This Message was edited by: 63fstbk on 1/10/02 9:53am ]</font>
 
1 - 3 of 3 Posts
Top