Ford Muscle Cars Tech Forum banner

spindles and disc brake conversions

27K views 19 replies 15 participants last post by  ghettostang 
Another note of interest. As pointed out the Versailles spindles won't fit the Mustang lower ball joint.

But... there is a guy that now makes a sleeve. It fits over the ball joint and takes up the extra space. Pretty slick piece. Costs $22 per side. Would be worth it it you can get a Versailles setup cheap vs paying more for a Granada. I know where there is one for free that I may get. The disk brake 9" is already gone, but the owner said I can have the brakes and anything else I need.

He also makes sleeves to use the regular Mustang tie rod ends with the Granada/Monarch/Vers spindle. Good if maybe you just rebuilt the front end and have good Mustang tie rod ends (that won't fit the spindles) or if you have a 65-66 with power steering.

The sleeves:
http://www.geocities.com/mustangsteve66/tierodbushings.html

Later

David Cole

<font size=-1>[ This Message was edited by: Dave C on 2/2/02 5:24am ]</font>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top