[Kenny nunez]

You also can purchase a later style thermostat housing that has a pipe thread plug for the emissions system used on most FEs from the late 60s on for a place to add the temperature sender. I have remotely located the oil pressure sender with a steel braid hose which also grounds the sender because of space limitations.

 

[Kenny nunez]

The current senders are not compatible with the SW gauges you are planning to use.
Summit has a wide selection of gauges along with the senders that work with them.

 

[Kenny nunez]

I used the ”low fuel & door ajar “ console to mount the din satellite radio with a 1.5“ temperature & oil pressure gauges to fill the outer void. Also keep the OBD scanner connected.