Ford Muscle Cars Tech Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
7,490 Posts
Discussion Starter #1 (Edited)
These are out of 'Mustang' magazines out of the 80's. One is the Spring 1985 issue, the other is July 1989. The 1989 article is from the same builder, but has some stuff added. FM cuts their size in half, but I have the full scans. Anyone who wants to read larger, original scans, I can email them. Just let me know the address. :)

This is the Spring '85 article in Mustang magazine.

I don't mess with modifying the gear synchronizers. I did once, and it didn't seem to make any difference. Mine are stock, except for the oiling mods and checking/adjusting gear clearances. That being said, I've only had one gear that was tight.

Good Luck!
 

Attachments

·
Registered
Joined
·
7,490 Posts
Discussion Starter #2
Mustang July 1989 article.
 

Attachments

·
Registered
Joined
·
165 Posts
excellent info i diddnt know there were so many things you could to do improve the trans wow. thanks for posting!
 

·
Registered
Joined
·
1,786 Posts
See what happens when ya open yer trap?? LOL ;)
 

·
Registered
Joined
·
1,786 Posts
Thanks again Mike...
 

·
Registered
Joined
·
1,786 Posts
:tup: Gots mine..... ;)
 
1 - 16 of 16 Posts
Top