Username
Join the discussion
Recommended Reading
-
82 Ford Fairmont
All Ford TechboardHi I've got a 1982 ford Fairmont with the straight 6 in it I was wondering what's the easiest engine swap I could do with her and maybe get a bit more power thanks- 2
- 141
-
Tawhman · updated
-
How should I plumb this?
All Ford TechboardI have a 69 Fairlane that had factory air, doesn't now, will again one day. I have a 408 stroker in it now, and I want heat inside the car. Until now nothing was connected to the heater core and water pump and thermostat housing were all plugged. There are 3 pipes to the heater core on the...- 1
- 121
-
Y Block Port / Passage Question
All Ford TechboardDoes anyone know what this might be? At the tip of the screwdriver - I put in the stainless bolt. It was an open, threaded hole that puffed smoke. Did not see oil or any other fluid coming out. It only puffed smoke. Strange. Could this be a port to the exhause passage for a hot air choke...- 3
- 508
-
351c in 66 falcon with a mustang 11 front end
All Ford Techboard351c in a 1966 falcon with a mustang 11 front end- 0
- 112
-
wooddon · updated
-
Odd thrust washer bolts
All Ford TechboardTearing my engine down for an overhaul. It’s a ‘62 221 V8. Things came to a halt when I ran into this. Was this a factory bolt head design, or switched to when engine was rebuilt 40 years ago? Who makes a bit for these? I saw nothing online. BTW, Argh!- 4
- 424
Join now to ask and comment!