Ford Muscle Cars Tech Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
160 Posts
Discussion Starter #1
I have a 1967 ford 289hi-po engine. 3.80gears and T5 trans. All stock. I want the fastest 0-60 and 0-100 times possible. I was thinking on a cam that is good from 1,000rpm to 5,000. I have a good compression 10:5. I was thinking on a cam with like a .500 lift or something i dont know what would be best thought. I am going to add new heads later on like AFR Heads. Suggestion welcomed

_________________

I have a 1967 Ford Mustang with a 289hi-po motor stock, Jba headers,
3.80 gears about 300hp putting in mods soon.

<font size=-1>[ This Message was edited by: masterd on 1/15/02 9:22am ]</font>
 

·
Registered
Joined
·
74 Posts
Upgrade your hydraullic cam if possible to a retrofit hydraullic roller and you will have globs of low end power!!NO larger than a stock 5.0 85 roller cam or one above that one for great low end torque with great 60 foot times!
 
1 - 2 of 2 Posts
Top