wiring whoas [help]

998 Views 2 Replies 3 Participants Last post by 1 Bad 88 GT, Feb 28, 2006

chriscra

Discussion Starter · Feb 27, 2006

88 gt 5.0 fuse block with burnt wires car ran. took a 87 gt 5.0 dash harness complete and put in 88 gt now car will not start. cranks but no spark or fuel. 87gt ran also. does anyone know the difference, or does anyone have a schematic or point to point on wirng for these.

Save

1 - 3 of 3 Posts

FEandGoingBroke

· #2 · Feb 27, 2006

check the CPS or the CS (crank and or cam position sensor's) they may be diffrent for the two diffrent years of vehicle.... Just call the local parts store and compare the ignition and spark/timing/pcm/ecm devices for each year and have them cross the #'s to the other year's and maybe you'll find the culprit for like $20 bucks or so...

FE

FE

Save

1 Bad 88 GT

· #3 · Feb 28, 2006

Was it a MAF equipped 88 GT?

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month