Ford Muscle Cars Tech Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
165 Posts
Here is a guick look at what I found in only 5 minutes
Proline cast crank 3.4 stroke $225
Scat I beam rods 5.40" length chevy or ford pin. $239
from www.flatlanderracing.com
Keith Black hyperutectic pistons KB246 flat top just over 10.0 to 1 with 64cc head $288 From www.dirttrackthunder.com so add it all up you are just over $750 for all hard parts, add bearings, rings, machine work, cam lifters, timing set, oil pump, plus a good set of heads and 350HP should be childs play and still run on pump gas. what do you all think of this idea for a cheap build.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top