Ford Muscle Cars Tech Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
396 Posts
Discussion Starter #1
Hope to have all the pcs this week to hook up the TKO in the 63. STill looking for the spring. Does anyone know if they make a replacement bushing that attaches the zbar to the pedal rod? Its the square bushing mine is not in great shape and has seen many repairs so im not sure what it suppose to look like.

Any pictures or diagrams of how this is suppose to connect would be much appreciated.
thanks
Kevin
 

·
Registered
Joined
·
2,797 Posts
I have one out of the car. I'll take pictures for you tomorrow. Also I have seen guys make a new rod and take that square pivot off and use heim joints on both ends. They used a 3/8" rod and 3/8" female heims.
 

·
Registered
Joined
·
396 Posts
Discussion Starter #3
Thanks for the help. Just found another picture from above. I need to confirm the Z bar goes on the outside of the frame? the first pic i had showed it on the inside???? i couldn't see how that would work but will try mounting on outside tonight.

Can email pics to
[email protected]

Thanks
Kevin
 

·
Registered
Joined
·
2,797 Posts
Kevin, Pictures and email sent. Z bar goes on top of the frame under the steering box. Look for the two threaded holes.
 
1 - 4 of 4 Posts
Top