Engine Test Stand
Build your engine and test run it all on the same engine stand. Super quality for the professional or serious engine builder. Made in the USA from 3" X 3/16" square steel tubing, Heli-arc welded and powder coated. Comes with the following :
(1) Two bolt in frames to hold the Fuel tank and a battery ( not included )
(2) A three gallon fuel tank with a pick up and return bung incorporated
(3) An instrument panel with a starter button and ignition switch
(4) An electrical junction
(5) A thermostat block off plate with a water exit valve
(6) A machined brass water fitting with a quick release hose connection
(7) An adjustable rubber seal for the water pump hose inlet.
Last edited by coupeute; 04-04-2011 at 10:54 AM.