I just completed the swap, but I haven't started the car or tested it out yet. But the hardest part is the pedals by far. I removed the steering column, and there was TONS of room to install the pedals, we did this after about 4 hours of trying to get the pedals in with the column dropped. Just remove it and it's MUCH easier. After you drop it, it's only one bolt and it's out.
Second, make sure you know how to do a clutch job, and you put everything together right. I did it all from using the article here. I also had to trim my floor board just a hair to access all the shifter bolts, but no big deal.
Go for it and let us know how you do.