yes , special tool

 

You need it! It's at any parts store!

 

yep..parts store...special tool....

 

How do I remove the handles that wind windows up and down on 64 Gal? Is there a special tool for removing a clip behind the handle or something? thanks

Hey Mr. B,
You COULD use a special tool, but you don't need one!

All you need is about fourteen inches of Dental Floss!

Push the Door Panel back far enough to see the little Wire Clip that holds the Window Wind Up Handle on the Shaft. Double the Dental Floss and put in into the crack between the Handle and the Panel. Make sure the Dental Floss loop catches the Wire Clip. Then pull the Dental Floss so that it slides into the closed end of the Clip. Then it is just a matter of pulling on the Dental Floss till the Clip comes out of the grooves that hold it in place.

To replace the Clip, put it in place on the Wind Up Handle and then just push it onto the Shaft. It will click into place.

HTH

JC

 

I have an old small screwdriver that i cut a V in the tip and bent in a couple different directions. I just push panel back and reach in with mt special tool and pop the C clip off

 

Bought the special tool. Worked well, thanks for the advice. I am missing some of those clips the tool removed, can you buy them easily?

 

Yes, they are available.

 

If you can't find the special tool one day when you need it dental floss is one way but a rag will work as well also Those tools are pretty neat though.

 

The tool is vital! Makes it a breeze!


Sent from my Autoguide iPad app