remove horn ring [ push down in center turn counter clockwise about 1/8 turn]

remove center nut -- attach steering wheel puller tighten center bolt whell will come right off--

 

Try counter clock wise if clock wise doesn't work. I just pulled my 67, and it was counter. You will know when it is the right way, it will just fall in your hands along with the horn spring.

It is best to disconnect the ground at the battery, or you will be blowing your horn when you push down to turn it.

 

thanks, your suggestions worked...here is another dumb question, do I need a steering wheel puller? I removed the center nut but the wheel is stuck in there.....

 

Yep probably need a puller as it's tapered a little bit. Unless you are a real muscle man as I've seen it done by hand. The guy put the nut on til the bolt is just below the edge of it, smacked it with a hammer, gripped both sides of the wheel and pulled really hard and it popped off.

I don't have the muscle so used a puller.

If you don't have the actual steering wheel puller one of those 3 way type gear pullers will work.

Deb

 

Yep, it wont come off unless you use a puller.

 

Nope...I am not that strong.. I will try to locate a puller ....thanks....

 

Disconnect The Battery First!!!!

OOPS Don already got it!